Bently Nevada 330130-080-00-05 | 3300 XL 8mm Extension Cable

Description

Product Overview

Part Number: 330130-080-00-05 Manufacturer: Bently Nevada (Baker Hughes) Product Series: 3300 XL 8mm Transducer System Extension Cable Type: Standard non-armored triaxial extension cable, USA manufactured. This 8.0-meter extension cable connects 3300 XL 8mm proximity probe to the 3300XL proximitor. It transmits eddy current displacement signals for shaft radial vibration, thrust position and keyphasor measurement on steam turbines, centrifugal compressors, generators and large process pumps. It is a passive component of the complete TSI machinery protection system, compliant with API 670 standard. The sum of probe integral cable length plus this extension cable length must match the calibrated total length requirement of the proximitor.

Technical Specifications

Engineer Notes

1. Critical rule: Probe integral cable length + extension cable length must equal the total electrical length specified for the matched 3300XL proximitor. Mismatched total length will cause scale factor error and inaccurate readings.
2. This cable only works with 3300XL 8mm probe system; NOT compatible with 11mm, NSv or older 3300 series transducer systems.
3. 00 suffix represents non-armored triaxial cable, suitable for clean, low abrasion installation environments.
4. Do not splice, cut or modify the triaxial cable or factory connectors. Any alteration destroys impedance matching and voids calibration and warranty.
5. Handle connectors carefully; avoid dirt, moisture or pin damage. Keep protective caps installed when connectors are disconnected.
6. The final 05 suffix indicates the cable is supplied with factory calibration test documentation.
7. Route cable separately from high voltage power cables to minimize electrical noise interference.

Pre-Shipment Test Protocol

1. Continuity and insulation resistance test of full cable
2. Impedance and signal integrity check
3. Connector pin continuity & leakage test
4. Visual inspection: cable jacket, connector shell, pins and labeling
5. Part number, label and marking verification
6. Anti-static & shockproof packaging inspection

Buyer FAQ

Q: Is 330130-080-00-05 new original? A: We supply brand new original Bently Nevada units, 12-month warranty, factory test certificate available on request.

Q: What does 080 mean in part number? A: 080 represents cable length of 8.0 meters.

Q: What is the difference between suffix 00 and 05? A: 00 is standard version; 05 version comes with factory calibration test certificate. Electrical performance is identical.

Q: Can I combine this cable with any 3300XL proximitor? A: No. The combined length of probe + extension cable must match the proximitor calibrated length. Always verify total length before ordering.