Description
Product Overview
The ABB ADT218437R0001 is a high-precision measurement and interface board designed for ABB UNITROL series generator static excitation systems. It functions as an analog signal acquisition and conditioning board, responsible for sampling generator voltage, current, rotor temperature and auxiliary analog signals, converting raw field measurements into digital data for the main excitation controller. This board is a critical spare part for power plant excitation cabinets, providing high isolation and anti-interference signal conditioning for synchronous generator regulation.
Technical Specifications
| Parameter | Details |
|---|---|
| Manufacturer | ABB |
| Part Number | ADT218437R0001 |
| Module Type | Analog Measurement / Signal Conditioning Board |
| Power Supply | 24 VDC, ±10% |
| Analog Input Channels | Multi-channel isolated analog inputs for VT/CT signals |
| Input Signal Type | AC voltage, AC current, 4-20mA, PT100 temperature |
| Isolation Voltage | 2000V AC isolation between field side and controller side |
| Sampling Resolution | 16-bit ADC |
| Operating Temperature | -25°C ~ +55°C |
| Storage Temperature | -40°C ~ +70°C |
| Relative Humidity | 5% ~ 95%, non-condensing |
| Mounting | Rack-mounted inside UNITROL excitation cabinet |
| EMC Compliance | IEC 61000 series for power plant environments |
Key Features
- Multi-channel isolated analog acquisition for generator excitation control loops
- High-voltage isolation protects the main controller from surge and transients on CT/VT circuits
- Built-in signal filtering to suppress power frequency noise and EMI interference
- Onboard self-diagnosis to detect signal open-circuit, short-circuit and board faults
- Sends conditioned measurement data to the main excitation CPU via internal backplane bus
- Rugged PCB design with reinforced components for continuous generator operation
- Supports real-time monitoring of generator stator voltage, stator current and rotor thermal status
Installation & Test Notes
- Perform full lockout and tagout of excitation power and high voltage CT/VT circuits before handling the board.
- Wear ESD protection wristband and anti-static mat; avoid touching PCB traces and connector pins.
- Align backplane connectors carefully, fasten mounting screws with proper torque to prevent connector damage.
- Verify CT secondary wiring is properly shorted before energizing measurement circuits.
- Restore 24V control power, run board self-test via excitation HMI or service tool.
- Inject reference test signals to validate all analog channel readings before returning to online service.
- Check fault log and signal trending after commissioning to confirm stable data acquisition.
Application
Deployed in static excitation cabinets for synchronous generators in thermal power, hydroelectric power and combined-cycle power plants. It provides essential measured values for voltage regulation, reactive power control and generator protection functions within ABB UNITROL excitation systems.
FAQ
Q: What system is ADT218437R0001 used for? A: It is an analog measurement board for ABB UNITROL generator static excitation systems, collecting generator VT, CT and temperature signals.
Q: Can it be hot-swapped when the generator is online? A: Not recommended. De-energize control supply and lock out CT/VT circuits before replacement to avoid CT open circuit risk.
Q: What faults can this board report? A: It can detect input signal loss, over-range signals, channel short-circuit, ADC failure and internal power supply faults.
Start Chat
Send an Email
